Marshall electronic Computer Monitor V R901DP AFHD User Manual

Marshall Electronics  
V-R901DP-AFHD  
Portable HD/SD Widescreen LCD Monitor  
Operating Instructions  
Marshall Electronics, Inc.  
1910 East Maple Ave.  
El Segundo, CA 90245  
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688  
 
Optional Accessories  
Contents  
Product Overview.....................................................................................................................................................4  
Features ....................................................................................................................................................................4  
Batteries  
• IDX-E7S  
• IDX-E7  
• IDX-E10S  
• IDX-E10  
71Wh/4.8Ah Lithium Ion V-Mount Battery Pack  
71Wh/4.8Ah Lithium Ion V-Mount Battery Pack with PowerLink  
98Wh/6.6Ah Lithium Ion V-Mount Battery Pack  
Installation and Initial Setup ...................................................................................................................................5  
Unpacking..............................................................................................................................................................5  
Installation..............................................................................................................................................................5  
Connections and Power-On...................................................................................................................................5  
98Wh/6.6Ah Lithium Ion V-Mount Battery Pack with PowerLink  
Battery Chargers  
Front Panel Features ...............................................................................................................................................6  
Power Button ........................................................................................................................................................6  
Input Select Buttons...............................................................................................................................................6  
On-Screen Menu Navigation Buttons ....................................................................................................................6  
User-Definable Function Buttons...........................................................................................................................6  
Image Adjustment Knobs.......................................................................................................................................6  
Tally Lights.............................................................................................................................................................6  
• IDX-VL-2 Plus  
• IDX-VL-4S  
2-Channel Sequential Multi-Format V-Mount Quick Charger/Power Supply  
4-Channel Simultaneous V-Mount Quick Charger  
Battery Adapters  
Rear Panel Features.................................................................................................................................................7  
Power Input............................................................................................................................................................7  
Signal Input/Output ................................................................................................................................................7  
Tally Interface ........................................................................................................................................................7  
Mounting Holes......................................................................................................................................................7  
• V-ABA-01  
Anton Bauer to IDX Battery Adapter Plate  
Power Adapter Cables  
• V-PAC-D-XLR  
• V-PAC-XLR-1  
4-Pin XLR Male to Anton Bauer PowerTap Cable (3 ft.)  
4-Pin XLR Male to 4-Pin XLR Female Cable (3 ft.)  
Compatible Input Formats.......................................................................................................................................8  
On-Screen Menu.......................................................................................................................................................9  
STRUCTURE OVERVIEW ....................................................................................................................................9  
MAIN MENU AND NAVIGATION ..........................................................................................................................9  
MARKER SETUP SUBMENU .............................................................................................................................10  
16:9 Markers....................................................................................................................................................10  
4:3 Markers......................................................................................................................................................11  
Marker Background .........................................................................................................................................11  
Center Marker..................................................................................................................................................11  
VIDEO CONFIGURATION SUBMENU ...............................................................................................................12  
Color Temperature Presets .............................................................................................................................12  
Adjusting Color Bias ........................................................................................................................................12  
Adjusting Color Gain........................................................................................................................................12  
Monochrome Mode..........................................................................................................................................13  
Blue Only Mode...............................................................................................................................................13  
Pixel-to-Pixel Mode..........................................................................................................................................13  
Aspect Ratio Setting........................................................................................................................................14  
Scanning Modes..............................................................................................................................................14  
Delay Modes....................................................................................................................................................14  
SYSTEM CONFIGURATION SUBMENU............................................................................................................15  
Internal SMPTE Color Bars .............................................................................................................................15  
User-Definable Function Buttons ....................................................................................................................15  
Status Display..................................................................................................................................................15  
Saving and Loading User Configuration Presets ............................................................................................15  
Mounts and Adapters  
• V-LCD70TMB-02  
• V-DG1105  
• V-MG11043  
Set of 3 ¼”-20 Tripod Mounting Brackets  
Noga 8.3” Articulating Arm (¼”-20 to ¼”-20). Holds up to 4.5 lbs.  
Noga 9.7” Articulating Arm (3/8” to ¼”-20). Holds up to 7.5 lbs.  
Slide-Shoe Adapter with Nut, for Noga Articulating Arm  
• V-LP-SLDSHOE1/4  
• V-LP-SLDSHOEBLOCK Slide-Shoe Block (Required with V-LP-SLDSHOE1/4)  
• V-LP-SLDSHOENUT  
• V-VP-TBRKT  
• V-ABA-01  
Extra Slide-Shoe Nut for V-MG11043 in Slide-Shoe Configuration  
Expansion T-Bracket (¼”-20 and 3/8” holes)  
V-Mount to Anton/Bauer Adapter  
Cleaning Accessories  
• V-HWP-K  
Package of 10 Cleaning Wipes for LCD Displays  
Specifications.........................................................................................................................................................16  
Maintenance............................................................................................................................................................17  
Optional Accessories ...........................................................................................................................................18  
Visit www.LCDRacks.com for more information and additional accessories  
Warranty..................................................................................................................................................................19  
18  
3
 
Specifications (continued)  
Product Overview  
The V-R901DP-AFHD is a 9.0” high definition widescreen LCD monitor featuring our completely digital TFT-MegaPixel  
active matrix LCD platform. Weighing only 2.88 lbs, this monitor is ideal as a light-weight high resolution viewfinder or  
focus-assist monitor. Emulation of SMPTE-C/EBU color and adjustable color temperature enable the most precise color  
representation possible. Our proprietary digital signal processing features 10-bit A/D conversion of all analog signals, with  
4X over-sampling and 5-line super-adaptive 2D comb filtering of composite signals. De-interlacing is performed using our  
HyperProcess algorithm with motion adaptive interpolation. Multi-format compatibility accommodates virtually all video  
formats including NTSC/PAL, 480i/p, 720p, and 1080i standards. VGA and DVI inputs accept VESA standards allowing  
the display to be used as a computer monitor. Advanced features include aspect ratio settings, a variety of screen  
markers, underscan mode, blue-only mode, monochrome mode, H/V delay, and Pixel-to-Pixel mode.  
Features  
High-Resolution 9.0” Widescreen Panel  
The V-R901DP-AFHD features an all-digital TFT-MegaPixel active matrix LCD system with 1.2 million pixels. The LCD  
panel features a brightness of 400 cd/m2 and a contrast ratio of 600:1 making the display ideal in a variety of  
environments and lighting conditions.  
Multi-Format Compatibility  
With a variety of analog and digital inputs, the V-R901DP-AFHD accommodates virtually all video formats. Input types  
include Composite Video, S-Video, YPbPr, SDI, VGA, and DVI with HDCP. Accepted formats include NTSC/PAL,  
480i/p, 576i/p, 720p, 1035i, and 1080i standards, as well as VESA PC formats through XGA (1024 x 768).  
End-to-End Digital Signal Processing  
Analog signals are digitized using an advanced 10-bit process with 4x over-sampling, 5-line super-adaptive 2D comb  
filtering, and exacting color space conversion. Video is scaled to fit on the screen in the highest possible resolution  
using a state-of-the-art LSI that incorporates precision gamma correction and our HyperProcess motion adaptive  
interpolation for interlaced images.  
ColorMatch Conversion with Color Temperature Adjustment  
Emulation of SMPTE-C/EBU color space allows the V-R901DP-AFHD to replace any broadcast CRT monitor. Settings  
include D55, D65 and D95. Bias and Gain adjustment for each color enables precise color matching and white  
balance.  
Maintenance  
Advanced Features  
Aspect ratio settings, underscan mode, blue-only mode, monochrome mode, and H/V delay are a few of the advanced  
features making the V-R901DP-AFHD at home in any broadcast environment. Pixel-to-Pixel mode also allows native  
display of any incoming image format.  
Screen Cleaning  
Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-  
fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.  
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the  
surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the  
screen to avoid damaging the LCD.  
Flexible Screen Markers  
A variety of screen markers in both 4:3 and 16:9 modes allow accurate monitoring of the different aspect ratios used in  
broadcast environments.  
User-Definable Function Buttons  
Two user-assignable function buttons on the front-panel allow quick access to numerous settings and features  
including aspect ratio, screen markers, monochrome mode, color temperature, delay mode, and more.  
Faceplate Dusting  
Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface,  
attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.  
4
17  
 
Specifications  
Installation and Initial Setup  
PANEL  
TALLY  
Unpacking  
Screen Size  
Display Area (h x v)  
Aspect Ratio  
Pixels  
Color Depth  
Viewing Angle (h x v) 160° x 140°  
9.0” Diagonal  
3 LEDs (Green, Red, Yellow). Activation requires contact  
closure of pin to ground on the HD-15 connector:  
196.8 x 118.08 mm  
16:9 Native (4:3/16:9 Modes)  
800 x RGB x 480  
Carefully unpack the V-R901DP-AFHD monitor and verify that the following items are included:  
Pin No.  
1
2
Signal  
Green  
Red  
• V-R901DP-AFHD Monitor  
• V-PS12-5V-XLR Power Supply with 4-Pin XLR Connector  
• Operating Instructions  
24-bit (16,777,216 Colors)  
3
4
5
6
Yellow  
Ground  
Ground  
N/C  
Brightness  
400 cd/m2  
600:1  
0.082 x 0.246 mm  
0.246 x 0.246 mm  
Contrast Ratio  
Dot Pitch (h x v)  
Pixel Pitch (h x v)  
7
N/C  
Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage,  
immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States,  
call +1 (310) 333-0606.  
8
N/C  
9
N/C  
10  
11  
12  
13  
14  
15  
N/C  
N/C  
N/C  
N/C  
N/C  
N/C  
Installation  
VIDEO INPUT/OUTPUT  
Video Input / Output  
Supports SMPTE 170M, NTSC/PAL  
The V-R901DP-AFHD monitor is shipped with a ¼”-20 mounting bracket on the bottom side, allowing the monitor to be  
flexibly mounted to a camera or other device using a variety of mounts. This ¼”-20 mounting bracket can also be  
attached to any side of the monitor.  
ELECTRICAL  
S-Video (Y/C) Input / Output  
Supports SMPTE 170M, NTSC/PAL  
Power Consumption 2A @ 12VDC (24 W)  
Voltage Requirement 12 VDC  
YPBPR Input / Output  
Supports SMPTE 260M, 274M, 296M  
Connections and Power-On  
V-PS12-5V-XLR Power Supply:  
Input  
Output  
100V-240V, 1.5A, 50-60Hz  
12VDC, 5A, 60W Max  
Plug the V-PS12-5V-XLR power supply into an AC power source (100-240 V @ 50/60 Hz). Attach the 4-pin XLR  
connector to the back of the monitor. Please note that 12VDC can be also supplied directly to the monitor from a  
variety of sources. The monitor will draw approximately 2 Amps at 12 Volts in operation.  
HD-SDI Input / Output  
Supports ITU-R BT.656, SMPTE 259M, 292M  
V-Mount Battery Adapter  
(Accepts standard 12V / 14.4V V-Mount Batteries)  
VGA Input  
Connect the required cables for video signal input and output. (Power must be applied to the V-R901DP-AFHD for the  
active loop-though outputs to be activated.) All BNC connectors are rated at 75Ω.  
Supports RGBHV, RsGsBs, RGsB, RGB CS,  
DVI Input  
Supports Digital Signals Only (DVI-D)  
HDMI, HDCP Supported  
MECHANICAL  
Turn on the unit by pressing the power button located on the front panel. Select a video input by pressing the  
corresponding input select button.  
Dimensions (w x h x d): 9.00” x 6.92” x 2.49”  
Additional Mounting:  
¼”-20 Mounting Bracket  
CONNECTORS  
Video Input  
Weight (Monitor Only): 2.88 lbs  
Operating Temperature 32°F to 120°F (0°C to 50°C)  
Storage Temperature  
-4°F to120°F (-20°C to 50°C)  
Video  
1 x BNC Female (75 Ω)  
1 x 4-Pin Mini-DIN  
3 x BNC Female (75 Ω)  
1 x BNC Female (75 Ω)  
1 x HD-15 Female  
S-Video (Y/C)  
YPBPR  
HD-SDI  
VGA  
Compliance  
, FCC-Class A, ANSI-63.4  
(Certificates on file)  
DVI  
1 x DVI-I 29-Pin Female  
RoHs  
Do not dispose. Return to  
Manufacturer or Authorized  
Recycle Facility.  
Video Output (Active Loop-Through)  
Video  
S-Video (Y/C)  
YPBPR  
1 x BNC Female (75 Ω)  
1 x 4-Pin Mini-DIN  
3 x BNC Female (75 Ω)  
1 x BNC Female (75 Ω)  
SDI  
Power Input  
4-Pin XLR Male  
Tally Interface  
HD-15 Female  
16  
5
 
On-Screen Menu (continued)  
Front Panel Features  
SYSTEM CONFIGURATION SUBMENU  
6
Top Front Panel  
Video Configuration Submenu  
Internal SMPTE Color Bars  
Use to display internally generated SMPTE split-field color bars.  
Lower Front Panel  
User-Definable Function Buttons  
1
4
5
2
3
Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor.  
The following options are available for each button:  
• DELAY  
• RATIO  
• BACK  
Enable and rotate amongst delay modes.  
Toggle between 4:3 and 16:9 aspect ratios.  
Rotate amongst marker backgrounds.  
• CENTER  
• MARKER  
• MONO  
• CTEMP  
• PTP  
Enable/disable center marker.  
Enable and rotate amongst marker settings (choices depend on aspect ratio setting).  
Enable/disable monochrome mode.  
Rotate amongst color temperature settings.  
Enable/disable Pixel-to-Pixel mode.  
1
Power Button  
User-Definable Function Buttons  
4
Turn the monitor on by pressing the power button.  
In the OFF state, the LED will shine red. The LED  
will shine green when the monitor is turned on.  
Two user-definable function buttons can be used for  
direct access to various settings. Functions are  
assigned using the on-screen menu (See User-  
Definable Function Buttons – Page 15).  
FUNCTION 1 is set to RATIO by default.  
FUNCTION 2 is set to PTP by default.  
2 Input Select Buttons  
Image Adjustment Knobs  
5
Use the input select buttons to select the input to be  
displayed:  
Use the image adjustment knobs to adjust the  
following settings. Pressing each knob will display  
the current status of the corresponding control:  
Status Display  
Video  
Use to enable on-screen display of input/format status in the upper-left corner of the screen.  
S-Video  
YPbPr (SD/HD)  
VGA  
DVI  
SDI (SD/HD)  
Brightness (0-64)  
Color (0-64)  
Tint (0-64) [NTSC Only]  
Contrast (0-64)  
Saving and Loading User Configuration Presets  
Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. All  
monitor settings on the monitor are saved, including the image adjustment knob settings.  
Each input automatically detects the applicable  
Tally Lights  
6
formats (See Compatible Input Formats – Page 8).  
Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded  
by selecting MFG. (Factory defaults cannot be overwritten.)  
Three tally LEDs (green, red, and yellow) are  
provided as general purpose indicators. Each LED  
can be individually controlled, providing multiple  
indications. Tally LEDs are controlled via the HD-15  
connector on the rear panel (See Tally Interface –  
Page 7)  
On-Screen Menu Navigation Buttons  
3
Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.  
Use the Menu, , , and Select buttons to display  
and navigate the on-screen menu (See Main Menu  
and Navigation – Page 9).  
6
15  
 
On-Screen Menu (continued)  
Rear Panel Features  
VIDEO CONFIGURATION SUBMENU (continued)  
Aspect Ratio Settings  
Use to switch between 4:3 and 16:9 aspect ratios.  
4
As the V-R901DP-AFHD monitor has a native resolution of 800 x 480 RGB pixels, incoming images are automatically  
scaled to fit the screen:  
In 4:3 mode, images are scaled to fill the maximum 4:3 portion of the screen (640 x 480), with black bars filling the  
remainder of the screen.  
1
In 16:9 mode, images are scaled to fill the entire 16:9 screen (800 x 480),  
3
2
Rear Panel  
4:3 Mode  
16:9 Mode  
Note: The aspect ratio setting is ignored when Pixel-to-Pixel mode is enabled.  
Power Input  
Tally Interface  
1
3
Connect the 12VDC input to the 4-Pin XLR power input  
connector. Power can be supplied from the included  
power supply, or from a variety of DC sources supplying  
at least 2 Amps at 12 Volts.  
Each tally light is activated via the HD-15 connector by  
connecting the corresponding pin to ground. A variety of  
external devices can be used to perform the contact  
closure. No additional power should be supplied to the  
HD-15 port.  
Scanning Modes  
Use this setting to switch between normal and underscan modes:  
IMPORTANT: If using a power source other than the  
included power supply, be sure that the polarity of the  
DC input is correct:  
In normal scan mode, the active portion of the video signal is displayed on the screen, with 0% overscan.  
Tally Interface: HD-15 Pinout  
In underscan mode, area around the active video area is displayed on the screen, resulting in blanking intervals  
being shown around the perimeter of the active image. Use this mode to clearly view the edges of the active video  
area.  
Pin No.  
1
2
Signal  
Green  
Red  
Pin 1: GND  
Pin 2: N/C  
Pin 3: N/C  
3
4
5
6
Yellow  
Ground  
Ground  
N/C  
Pin 4: +12VDC  
7
N/C  
Delay Modes  
8
N/C  
9
N/C  
10  
11  
12  
13  
14  
15  
N/C  
N/C  
N/C  
N/C  
N/c  
N/C  
Use this setting to enable one of three delay modes (H/V, H, V):  
Signal Input/Output  
2
In H/V delay mode, both horizontal sync and vertical sync are delayed, resulting in both horizontal and vertical  
blanking periods being shown on the screen.  
Connections:  
Composite Video Input/Output (BNC)  
In V delay mode, vertical sync is delayed so that the vertical blanking period is displayed on screen.  
In H delay mode, horizontal sync is delayed so that the horizontal blanking period is displayed on the screen.  
S-Video Input/Output (4-Pin Mini-DIN)  
YPBPR Input/Output (BNC x 3)  
SDI Input/Output (BNC)  
VGA (HD-15)  
DVI (29-Pin connector, DVI-D signals only)  
V-Mount Battery Adapter  
4
Accepts standard V-Mount 12V / 14.4V batteries  
Note: Delay modes are only available in normal scan mode.  
All outputs are active and require the monitor to be  
powered.  
14  
7
 
On-Screen Menu (continued)  
Compatible Input Formats  
VIDEO CONFIGURATION SUBMENU (continued)  
Format  
Composite  
S-Video  
YPbPr  
SDI  
VGA  
DVI-D  
Monochrome Mode  
NTSC  
Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale  
picture.  
PAL  
525i  
625i  
Blue-Only Mode  
486p / 59.94  
576p / 50  
Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image, switching  
off the red and green components. Use this mode when calibrating the monitor to SMPTE color bars with the following  
procedure:  
1035i / 60  
1035i / 59.94  
1080i / 60  
1.  
2.  
3.  
4.  
Allow the monitor to warm up for at least 5-10 minutes.  
Display SMPTE split-field color bars on the monitor using the internal generator or an external source.  
Enable Monochrome mode.  
1080i / 59.95  
1080i / 50  
Locate the pluge pattern (super black, black, and gray bars) at the lower-right corner of the screen. Adjust the Brightness knob until there is  
no visible difference between the super black and black bars, but the gray bar is still visible.  
1080psF / 24  
1080psF / 23.98  
1080p / 30  
5.  
6.  
7.  
8.  
Adjust the Contrast knob until an even grayscale appears along the top bars.  
Disable Monochrome mode.  
Enable Blue-Only mode and adjust the Color knob so that the outermost bars (white and blue) appear to match in brightness.  
1080p / 29.97  
1080p / 25  
Composite/S-Video NTSC only: Adjust the Tint knob until the third bar from the left (cyan) and the third bar from the right (magenta) appear to  
match in brightness.  
9.  
Disable Blue-Only mode.  
720p / 60  
720p / 59.94  
720p / 50  
Pixel-to-Pixel Mode  
720p / 30  
Use this setting to enable Pixel-to-Pixel mode.  
720p / 29.97  
720p / 25  
This mode bypasses the monitor’s internal scaling function and displays incoming images in their native resolution and  
aspect ratio, with a one-to-one mapping:  
640 x 480 @ 60Hz  
640 x 480 @ 75Hz  
640 x 480 @ 85Hz  
800 x 600 @ 60Hz  
800 x 600 @ 75Hz  
800 x 600 @ 85Hz  
1024 x 768 @ 60Hz  
1024 x 768 @ 75Hz  
For incoming formats smaller than the native resolution of the LCD panel (800 x 480), the image will be displayed  
in the center of the screen using only the necessary LCD pixels. For example, NTSC images will occupy exactly  
720 x 480 pixels. The surrounding pixels will be black.  
For incoming formats exceeding 800 x 480 pixels, only the center 800 x 480 of the incoming image will displayed  
occupying the whole screen, with the remainder of the picture cropped. For example, 1080i formats will both be  
cropped to 800 x 480 and displayed full-screen.  
Note: Pixel-to-Pixel mode will utilize the entire screen (800 x 480) regardless of the aspect ratio setting. Pixel-to-Pixel  
mode is not available when using the VGA or DVI inputs.  
1024 x 768 @ 85Hz  
1280 x 1024 @ 60Hz  
8
13  
 
On-Screen Menu (continued)  
On-Screen Menu  
VIDEO CONFIGURATION SUBMENU  
STRUCTURE OVERVIEW  
OFF, 13:9, 14:9, 4:3, 2.35:1,  
1.85:1, 95%, 93%, 90%,  
88%, 80%  
MARKER 16:9  
MARKER 4:3  
MARKER SETUP  
OFF, 95%, 93%, 90%, 88%,  
80%  
MARKER BACKGROUND  
CENTER MARKER  
COLOR TEMP  
OFF, HALF, BLACK  
OFF, ON  
D55, D65, D93, USR  
RED (0-100)  
GREEN (0-100)  
BLUE (0-100)  
RED (0-100)  
GREEN (0-100)  
BLUE (0-100)  
OFF, ON  
Video Configuration Submenu  
ADJ COLOR BIAS  
ADJ COLOR GAIN  
Color Temperature Presets  
Use this setting to choose one of three color temperature presets:  
• D55 (5500K)  
• D65 (6500K)  
• D93 (9300K)  
• USER (Adjustable Color Bias and Gain)  
VIDEO CONFIG  
MONO  
BLUE ONLY  
PIXEL TO PIXEL  
ASPECT RATIO  
SCAN  
OFF, ON  
MAIN  
OFF, ON  
4:3, 16:9  
NORMAL, UNDER  
OFF, H/V, V, H  
OFF, ON  
Adjusting Color Bias  
DELAY  
SMPTE BAR  
DELAY, RATIO, BACK,  
CENTER, MARKER, MONO,  
CTEMP, PTP  
FUNCTION 1  
DELAY, RATIO, BACK,  
CENTER, MARKER, MONO,  
CTEMP, PTP  
FUNCTION 2  
SYSTEM CONFIG  
STATUS DISPLAY  
LOAD CONFIG  
OFF, ON  
Color Bias Menu  
USR1, USR2, USR3, USR4,  
USR5, USR6, MFG  
Use this submenu to adjust bias of the color response. Adjust the bias for each color to alter the white balance of the  
image. The Color Temperature preset will automatically switch to USER when Color Bias settings are adjusted. It is  
normal for color bias adjustments to be very subtle.  
USR1, USR2, USR3, USR4,  
USR5, USR6  
SAVE CONFIG  
Adjusting Color Gain  
MAIN MENU AND NAVIGATION  
Access the main menu by pushing and holding the MENU button on the front panel of the monitor.  
Step through menu items using the and buttons.  
Choose a menu item by pressing SELECT.  
Rotate through options using the and buttons.  
Choose a setting by pressing SELECT.  
Return to the previous menu by pressing MENU.  
Exit the main menu by pressing MENU. The menu will automatically  
time out after 8 seconds. After exiting the menu, wait 1-2 seconds  
before displaying the menu again.  
Color Gain Menu  
Use this submenu to adjust gain of the color response. The Color Temperature preset will automatically switch to  
USER when Color Gain settings are adjusted.  
Main Menu  
12  
9
 
On-Screen Menu (continued)  
On-Screen Menu (continued)  
MARKER SETUP SUBMENU  
MARKER SETUP SUBMENU (continued)  
4:3 Markers  
Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the  
aspect ratio is set to 16:9, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled.  
• OFF (No Marker)  
• 95% Safe Area  
• 93% Safe Area  
• 90% Safe Area  
• 88% Safe Area  
• 80% Safe Area  
4:3 Marker Examples:  
16:9 Markers  
Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is disabled when the  
aspect ratio is set to 4:3, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled.  
• OFF (No Marker)  
• 13:9 Aspect Ratio  
• 14:9 Aspect Ratio  
• 4:3 Aspect Ratio  
• 2.35:1 Aspect Ratio  
• 1.85:1 Aspect Ratio  
• 95% Safe Area  
• 93% Safe Area  
• 90% Safe Area  
• 88% Safe Area  
• 80% Safe Area  
OFF (No Marker)  
90% Safe Area  
Marker Background  
Use this setting to choose how selected markers are displayed on the screen:  
• OFF  
• Half-tone Image area beyond the marker is shown at 50% intensity.  
• Black Image area beyond the marker is shown at 0% intensity (black).  
The marker is superimposed on the complete image.  
16:9 Marker Examples:  
Example (80% Marker in 4:3 Mode):  
OFF (No Marker)  
90% Safe Area  
Background OFF  
Half-tone Background  
Black Background  
Center Marker  
Use this setting to display a center marker on the screen. This feature is not available when H/V delay is on.  
2.35:1 Aspect Ratio  
4:3 Aspect Ratio Marker  
Center Marker  
10  
11  
 

LG Electronics Vacuum Cleaner V CD281NTY User Manual
LOREX Technology Security Camera SG7209P User Manual
Macsense Connectivity Stereo System DWM 4 User Manual
Makita Cordless Drill 6261D User Manual
Makita Cordless Saw XRJ01 User Manual
Maxtor Computer Drive 20302300 User Manual
Maytag Washer MAV 12 User Manual
Metabo Grinder GA 18 LTX G User Manual
Metra Electronics Car Satellite Radio System 99 7878B User Manual
Metra Electronics Car Stereo System 99 7425 User Manual